Fujitsu PRIMERGY GX2570 M6, Upgrade And Maintenance Manual, Page: 74 / 283

▶
Under Event Log the SEL is displayed.
All events concerning the system are displayed in a table in the Event Log
Content group.
▶
You can sort the table based on a column using the arrows in the header
field.
▶
You can also filter the table using the filter lists in the header of some
columns.
For more information on BMC settings, see the "BMC User Guide" of
your server.
Clearing the SEL using the BMC web interface
▶
Log in to the BMC web interface.
▶
Open the Logs & Reports menu.
▶
Click IPMI Event Log to open the System Event Log page.
▶
Click the Clear Event Log to clear the SEL.
For more information on BMC settings, see the "BMC User Guide" of
your server.
5.2.6 Updating the NIC configuration file in a Linux
environment
In order to prevent errors caused by changing network device names ( eth<x> ),
it is recommended to store the MAC address (hardware address) of a network
interface card in the related NIC configuration file of the Linux OS. When
replacing a network controller or the system board with onboard LAN
controllers in a server running Linux OS, the MAC address will change but not
automatically be updated in the definition file.
In order to prevent communication problems, it is necessary to update the
changed MAC address stored in the related
ifcfg-eth<x> definition file.
Procedures may differ depending on your Linux OS or the definition file
on the client system. Use the following information as reference. Ask the
system administrator to change the definition file.
Basic software procedures
74 Upgrade and Maintenance Manual GX2570 M6