96
Upgrade and Maintenance Manual
BX920
S4
Basic software procedures
©
c
o
gn
ita
s.
G
e
se
lls
ch
ft fü
r T
ech
n
ik
-D
o
ku
m
en
ta
tio
n
m
b
H
2
0
14
Pf
a
d:
C
:\P
ro
g
ra
m
m
e
\F
C
T
\ti
m
_a
pp
\ti
m
_l
oca
l\w
or
k\PI
C
H
O
L\
O
B
J_
D
O
KU
-1
9
86
8-
00
1.
fm
5.2.17 Using the Chassis ID Prom Tool
The Chassis ID EPROM located on the system board contains system
information like server name and model, housing type, serial number and
manufacturing data.
In order to integrate your system into the ServerView management environment
and to enable server installation using the ServerView Installation Manager,
system data needs to be complete and correct.
After replacing the server blade, system information has to be entered using the
ChassisId_Prom
Tool. The tool and further instructions are available to
maintenance personnel from the Fujitsu Technology Solutions Extranet:
http://partners.ts.fujitsu.com/com/service/intelservers/tools
I
For the Japanese market, follow the instructions provided separately.
5.2.18 Configuring LAN teaming
Use ServerView Operations Manager to obtain detailed information on existing
LAN teams:
Ê
In ServerView Operations Manager
Single System View
select
System Status
from the
Information / Operation
menu.
Ê
Under
Network Interfaces
select
LAN Teaming
.
Ê
The
Network Interfaces (Summary)
overview shows all configured LAN teams
and their components. Choose a LAN team to display further details:
–
LAN Team Properties
: Properties of the selected LAN team
–
LAN Team Statistics
: Available statistics about the selected LAN team
I
For more detailed information, refer to the "ServerView Operations
Manager - Server Management" user guide.
5.2.18.1 After replacing / upgrading LAN/CNA controllers
Please note when re-using a replaced LAN/CNA controller:
Ê
Confirm with the customer whether the LAN/CNA controller you have
replaced has been used as part of a LAN teaming configuration.
