Fujitsu PRIMERGY BX620 S4 User Manual Download Page 164

Page: 164 / 276

164

Chapter 6 High Reliability Tools

6.1 RAID Management Tool

RAID Management Tool is software that performs array configuration, disk

initialization and disk array monitoring. Refer to the manual in the Array Controller

Document & Tool CD for installation procedures and use.

For the manual of the SAS RAID Ctrl to be used, refer to "2.3.2 Notes on Configuring

RAID" (

pg.42).

OS installation using ServerStart

If the OS is installed using ServerStart, RAID Management Tool is installed with the OS and other high

reliability tools.

6.1.1 Before starting operation

After installing the OS in the server, perform the following settings. For details, refer to the manual in

the Array Controller Document & Tool CD.

Setting for an array administrator account

Set an array administrator account for the RAID management tool (ServerView RAID).

A Windows user account is required when using ServerView RAID.

Create the group "raid-adm", and create an account with any name for an administrator of the array in

this group.

Setting for the HDD check scheduler

When using the SAS RAID Ctrl (MegaRAID SAS), change the setting for the HDD check scheduler

according to the operation as required. It is set to 12:00 for everyday as default.

Summary of Contents for PRIMERGY BX620 S4





















































































































































































































































































Search results

Summary of Contents for PRIMERGY BX620 S4

Reviews:

Related manuals for PRIMERGY BX620 S4

Brands by name

Popular brands

Fujitsu PRIMERGY BX620 S4, User Manual

Search results

Summary of Contents for PRIMERGY BX620 S4

Reviews:

Related manuals for PRIMERGY BX620 S4

Brands by name

Popular brands