Fujitsu PRIMERGY BX620 S4, User Manual

Page: 107 / 276

107
PRIMERGY BX620 S4 Server Blade User’s Guide
5.2 Creating Backup Data for System
Recovery
After OS installation is complete, create backup data for system recovery, which
enables the system to be recovered if en error occurred.
When store the backup data in a floppy disk or CD/DVD, use the Display/USB Extension Cable to
connect the USB floppy disk drive or USB CD/DVD drive. For more information on the connection
procedure, refer to "Start Guide".
After OS installation or changing the system configuration, make sure to perform this procedure to
create backup data.
5.2.1 Windows Server 2008
When installing Windows Server 2008, backup whole server configuration to media such as a shared
folder or DVD.
Windows Server backup function
For Windows Server 2008, backup and restoration of the whole system can be performed using the
[Windows Server Backup] function.
After installation, perform a full backup for the whole system configuration only once. Incremental
backup can be specified to be automatically performed to only store changed data. Set or operate it
according to the operation configuration.
Windows Server backup does not support a tape device. When using a tape device, use software for
tape backup.
If setting up Windows Server 2008 Server Core, backup via the MMC console and Windows
PowerShell are not supported. Only command line (Wbadmin command) backup is supported.
Installing a backup component
In Windows Server 2008 default settings, backup components are not installed. Install it in advance.
1
Click [Start] – [Administrative Tools] – [Server Manager].
Server Manager starts.
2
Check [Windows Server Backup Features] in [Add Features] to install.