Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 87 / 446

C122-E001-10EN 2-41
2.4 Enabling XPAR (PRIMEQUEST 500A/500 series)
2.4 Enabling XPAR (PRIMEQUEST 500A/500 series)
For operation of split SBs, IO Units, and IOXs installed in partitions, an XPAR option
must be procured and license data must be registered.
The XPAR option may already be installed at the time of shipment from the factory.
If so, this procedure is not required.
For details on its settings, contact a Fujitsu certified service engineer.
1 Insert the CD-ROM disk supplied with the XPAR option into the CD-ROM drive
of the MMB console.
2 Click [Network Configuration]
→
[License]
→
[XPAR License].
The [XPAR License] window is displayed.
Figure 2.22 [XPAR License] window
Table 2.19 Displayed and setting items in the [XPAR License] window
Item Description
Select the license key file
in the license key CD.
This field is used to select the license key file to enable the
license.
License Status This field displays the current license status.
• Not registered: The license has not been registered.
Alternatively, the license data (entered) for registration is not
appropriate.
• Registered: The license is correctly registered.
License This field is used to enter license data.