Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 85 / 446

C122-E001-10EN 2-39
2.3 Enabling the Extended Mirror Mode
2.3 Enabling the Extended Mirror Mode
To use a partition in Extended Mirror Mode, a System Mirror Option must be
procured, and license data must be registered.
The system mirror option may already be installed at the time of shipment from the
factory. If so, this procedure is not required. For details on settings, contact a Fujitsu
certified service engineer.
1 Insert the CD-ROM disk supplied with the System Mirror Option into the
CD-ROM drive of the MMB console.
2 Click [Network Configuration]
→
[License]
→
[Mirror License].
The [Mirror License] window is displayed.
Figure 2.21 [Mirror License] window
Table 2.18 Displayed and setting items in the [Mirror License] window
Item Description
Select the license key file
in the license key CD.
Select the license key file used to validate the license.
License Status Displays the current license status.
• Not registered: The license has not been registered.
Alternatively, the license data (entered) for registration is not
appropriate.
• Registered: The license is correctly registered.
License Enter the license data.