Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 71 / 446

C122-E001-10EN 2-25
2.2 MMB Connection and Setup
2
Select the required items.
If multiple items are selected, they are joined by the AND operator and their sub-
items are joined by the OR operator.
Table 2.9 Displayed and setting items in the [Alarm E-mail Filtering Condition] window
3 Click the [Apply] button.
Item Description
Severity Selects the level of Severity to be reported by e-mail. More than one can be
selected.
• [Error]: Important problems such as hardware problems
• [Warning]: Events not always important but likely be a problem in the
future
• [Info]: Normal events such as partition power-on
Default: All errors
Partition Selects the target partition for reporting by mail. More than one can be
selected.
Default: All partitions
Unit Selects a unit to be displayed.
Select [All] or [Specified] with a radio button.
• If [All] is selected, filtering by [Unit] is not done.
• If [Specified] is selected, filtering by unit can be set. Use the check box
to select a unit for which you want events displayed.
Default: [All]
Source Selects the source on which notification e-mail is to be sent.
Select [All] or [Specified] with a radio button.
• [All]: Filtering by source is not done.
• [Specified]: Filtering by source can be set.