Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 66 / 446

2-20 C122-E001-10EN
CHAPTER 2 Setup
2.2.3.3 Specifying Telnet parameters
Specify Telnet parameters for MMBs. This can be performed by users with
administrator privilege.
Procedure
1
Click [Network Configuration]
→
[Network Protocols].
The [Network Protocols] window is displayed.
Figure 2.9 [Network Protocols] window
2 Specify the settings to the [Telnet] items.
Table 2.6 Displayed and setting items in the [Network Protocols] window
3
Click the [Apply] button.
Item Description
<Telnet>
Telnet Sets [Enable]/[Disable] of Telnet.
Default: [Disable]
Telnet Port Sets a port to be used for Telnet.
Default: 23
Timeout Sets a time interval allotted for entering data with Telnet
connected before the connection is cut off. (At the end of this
time interval, time-out occurs if no data is entered.)
Default: 600 seconds