Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 363 / 446

C122-E001-10EN A-7
A.7 SystemcastWizard Lite
A.7 SystemcastWizard Lite
A.7.1 Overview of SystemcastWizard Lite
SystemcastWizard Lite is a software program you can use to install an OS or back up
or restore hard disk data via a network. It is useful, for example, when you construct
a system involving multiple partitions. Using the PRIMEQUEST network activation
function can facilitate processing since you follow instructions from the management
console and need not insert activation CD disks or other such media into a
PRIMEQUEST drive.
Remote OS setup
This function is used for a new installation of an OS through a network. All end-to-
end installation processes are performed automatically based on the setup information
that is specified in advance. The required installation time and workload can be
reduced because a system with the same configuration can be constructed any number
of times and an OS can be installed in multiple partitions at the same time.
Backup/restore
This function is used to back up and restore system volumes through a network.
Since system volumes can be backed up and restored in units of disks, this function is
useful for backing up a system while it is being constructed or checked and for system
recovery in the event of a problem. A network activation function facilitates recovery
of the entire system volume while the OS is inactive.