Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 350 / 446

5-12 C122-E001-10EN
CHAPTER 5 Security Setup
2
Enter an SNMP v3 user.
Up to 16 users can be registered.
Table 5.6 Displayed and setting items in the [SNMP v3 Configuration] window
3
Click the [Apply] button.
To reflect the selected user, temporarily stop the SNMP daemon and then restart it.
Item Description
Engine ID Specify an engine ID.
Remarks: Any of the following characters can be used:
[0-9],[a-z],[A-Z], (en-size space)
! " # $ % & ' ( ) = - ^ ~ \ @ ` [ ] { } : * ; + ? < . > , / _ |
However, the following restrictions apply:
•The following characters cannot be used at the
beginning of a string: # (en-size space)
•The following character cannot be used at the end of
the string:
(en-size space)
User
User Name Specifies a user name. Selecting the check box of the target
user enables input of a user name.
Remarks: Any of the following characters can be used:
[0-9],[a-z],[A-Z], (en-size space)
! " # $ % & ' ( ) = - ^ ~ \ @ ` [ ] { } : * ; + ? < . > , / _ |
However, the following character cannot be used at
the beginning of the string:
" ' ` #
Auth Type Select the authentication type.
• MD5: Use MD5 as the hash function for password
encryption.
• SHA: Use SHA as the hash function for password
encryption.
authpassphrase Displays the packet encryption keyword used for password
authentication (no encryption is performed).
privpassphrase Displays the packet encryption keyword used for password
authentication and encryption.