Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 261 / 446

C122-E001-10EN 4-75
4.5 PSA Installation (Windows Server 2003) (PRIMEQUEST 580A/540A/580/540/480/440)
14
Click the [Advanced] tab, select [Probe] in [Settings], select [Enable] in [Value],
and click the [OK] button.
As a result, the adapter activates its link monitoring function, thereby setting
management LAN duplication.
Reboot to make the Teaming settings effective.
Figure 4.23 [Advanced] tab
4.5.2 Setting the destination of trap sending from the partition
Note:
z
SNMP v.3 is not supported in Windows.
z
Perform the tasks for this setting only if the setting is required.
z
If partitions are managed by operation management software, this setting
is required.
1 Click [Control Panel]
→
[Administrative Tools].
2 Click [Computer Management].
3
In the left tree, click [Services and Applications]
→
[Services].
4 In the right pane, click [SNMP Service].
The [SNMP Service] dialog box appears.
5 Click the [Trap] tab.
6
Enter the desired community name in the [Community Name] field, and click
[Add to List].
7
Click [Add] in the [Trap Send Destination] area.