Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 102 / 446

2-56 C122-E001-10EN
CHAPTER 2 Setup
2 Click the radio button of the number of the partition from which an SB, IO Unit,
or IOX is to be removed.
3
Click the [Remove SB/IOU] button.
The [Remove SB/IOU from Partition] window is displayed with a list of the SBs,
IO Units, and IOX incorporated into the partition selected in step 2.
Figure 2.32 [Remove SB/IOU from Partition] window
Table 2.25 Displayed and setting items in the [Remove SB/IOU from Partition] window
4
Click the radio button of the SB, IO Unit, or IOX to be removed from the
partition. You can select only one SB, IO Unit, or IOX at a time.
5 Click the [Apply] button.
A confirmation dialog box appears.
6 Click the [OK] button.
The selected SB, IO Unit, or IOX is removed from the partition and becomes free.
Item Description
SB/IOU Displays the SBs, IO Units, and IOX belonging to the partition.
Status Displays the status of each SB, IO Unit, and IOX.
Note (For SB)
• Number of CPUs: Displays the number of CPUs installed on
the SB.
• Memory: Displays the size of memory installed on the SB.
Note: When an SB is extracted and inserted, "unknown"
(unknown memory size) may be displayed.
Note (For IO Unit or IOX)
• Number of PCI slots: Displays the number of PCI slots on
the IO Unit.
• Number of PCIUs: Displays the number of PCI units
connected to the IO Unit.
• [Number of PEXU]: Displays the number of PCI Express
units connected to the IO Unit.