Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 100 / 446

2-54 C122-E001-10EN
CHAPTER 2 Setup
Figure 2.29 [Add SB/IOU to Partition] window
Table 2.24 Displayed and setting items in the [Add SB/IOU to Partition] window
4
Click the radio button of an SB, IO Unit, or IOX to be added to a partition.
Free SBs, IO Units, or IOX can be selected only one at a time.
5
Click the [Apply] button.
A confirmation dialog box is displayed.
6
Click the [OK] button.
The selected SB, IO Unit, or IOX is added to the partition.
Repeat steps 3 to 6 until all the necessary SBs, IO Units, or IOX are added
Item Description
Free SB/IOU Displays free SBs, IO Unit, and IOX (SBs not belonging to any
partition).
Status Displays the status of a free SBs, IO Unit, and IOX.
Note (For SB)
• [Number of CPUs]: Displays the number of CPUs installed
on the SB.
• [Memory]: Displays the size of memory installed on the SB.
Note: When an SB is extracted and inserted, "unknown"
(unknown memory size) may be displayed.
Note (For IO Unit or IOX)
• [Number of PCI slots]: Displays the number of IO Unit PCI
slots.
• [Number of PCIUs]: Displays the number of PCI units
connected to the IO Unit.
• [Number of PEXU]: Displays the number of PCI Express
units connected to the IO Unit.