Fujitsu primequest 2400E2 Design Manual Download Page 90

Page: 90 / 137

PRIMEQUEST 2000 Series Design Guide

3.3.1 Boot Type Selection

Boot type

Boot devices

Usage

Internal HDD or SAS-SSD (*1)

DU
Internal disk for an SB

Boot an OS that is installed in an internal HDD.

External HDD cabinet

JX40 S2 with a SAS card for connection

Boot an OS that is installed in an external HDD cabinet.

FC boot in an external file unit

(SAN environment)

FC card

Boot an OS that is installed in an external disk array device.

FCoE boot in an external file unit

(SAN environment)

CNA

Boot an OS that is installed in an external disk array device.

iSCSI boot in an external file unit

(SAN environment)

LAN card, and LAN port on an IOU

Boot an OS that is installed in an external disk array device.

Preboot eXecution Environment (PXE)

LAN card, and LAN port on an IOU

Boot via remote operation.

Boot from a virtual media

Device or file that is set as a virtual media

Boot from a device or file that is set as a virtual media.

Boot from a device connected to the front

USB port on the Home SB

USB connected device (e.g. CD and DVD)

Boot from a USB connected device that is used temporarily for

operations such as system configuration. (This operation is not

available when the front bezel is removed.)



It is recommended to use a redundant HDD (hardware RAID or software RAID) as a boot HDD.



When an internal disk is used as a boot device, RAID is configured at the same time as the OS

installation using ServerView Installation Manager (SVIM).

(*1) For details on the internal storage in the cabinet, refer to "

3.3.2 Guidelines for Selecting Internal Storage

Summary of Contents for primequest 2400E2







































































































































Search results

Summary of Contents for primequest 2400E2

Reviews:

Fujitsu primequest 2400E2, Design Manual, Page: 90 / 137

Search results

Summary of Contents for primequest 2400E2

Reviews: