CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
12
CA92344-0536-04
3.3.1 Connecting the MMB console PC
This section describes the connection of the MMB and MMB console PC.
There are two methods of connecting MMB with MMB console PC.
- Connect the COM port of the MMB console PC and the External interface RS232C (COM port) of the MMB with
RS232C cross cable.
- Connect the LAN port of the MMB console PC and the External interface MAINTENANCE LOCAL (LAN port) of the
MMB with LAN cable.
Remark
-
In PRIMEQUEST2400E/2800E/2800B, only way of
RS232 (COM port)
can be used.
- In PRIMEQUEST2400E2/2800E2/2800B2, both ways can be used.
For the mounting location and external interface overview of the MMB, refer to the figure below.
FIGURE 3.1 External Views of Mounting Locations and External interface of MMB
TABLE 3.2 External interface of MMB
External interface
Quantity
Remark
RS232C(COM Port)
1
Used by the field engineer when setting-up the device. It is not used in
normal operations.
LAN 1000Base- T
2
User port
LAN 100Base-TX
2
Maintenance
-[LOCAL] : CE Port
-[REMOTE]: REMCS Port
Set the terminal software by using following contents, at the time of connecting COM port,
TABLE 3.3 contents of setting of terminal software
Setting item
Value
Bit/ second
19200
Data bit
8
Parity
No
Stop bit
1
Flow control
No
Emulation
VT100
