background image

5

ENGLISH

When replacement parts are required, be sure the service technician has used replacement parts speci-
fied by the manufacturer or with same characteristics as the original part.  Unauthorized substitutions may
result in fire, electric shock, or other hazards.

Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.

The product should be placed more than one foot away from heat sources such as radiators, heat regis-
ters, stoves, and other products (including amplifiers) that produce heat.

When connecting other products such as VCR’s, and personal computers, you should turn off the power of
this product for protection against electric shock.

Do not place combustibles behind the cooling fan.  For example, cloth, paper, matches, aerosol cans or
gas lighters that present special hazards when over heated.

Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC100-240 V, the power cord attached conforms to the
following power supply voltage.  Use only the power cord designated by our dealer to ensure safety and
EMC.

When it is used by other power supply voltage,
power cable must be changed.

Consult your product dealer.

Power supply voltage:  AC100-125V

          AC 200-240 V                AC 240 V (SAA TYPE)

Power cord

Summary of Contents for Plasmavision PDS4207













































Reviews: