Fujitsu PFU Rack2-Filer User Manual Download Page 242

Page: 242 / 463

Chapter 7 Rack2-Viewer Window Operations

242 |

Rack2-Filer User's Guide

7.30

Cutting Sheets

This section describes how to cut a sheet.

Moving sheets into another binder

Select the sheets to be moved using the multi-sheet
selection procedure.

Drag the selected sheet and drop it onto a binder spine or a

binder page on the Rack2-Viewer window.

The sheet is moved to the specified binder.

Even if only some of the sheets with the same source file are
selected, all sheets with that source file will be cut.

• Even you want to move only one sheet, select the

sheet with the multi-sheet selection procedure.

• For details about selecting multiple sheets, refer to

"7.33 Specifying Multiple Sheets" (Page 253).

Summary of Contents for PFU Rack2-Filer
















































































































































































































































































































































































































































































Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands

Fujitsu PFU Rack2-Filer, User Manual

Search results

Summary of Contents for PFU Rack2-Filer

Reviews:

Related manuals for PFU Rack2-Filer

Brands by name

Popular brands