Fujitsu P24W-7 LED, Operating Manual

Page: 38 / 48

Operation
Advanced setting functions
Calling up the Advanced window
Input select Select the input signal
This function is used to select the input signal (VGA, DVI, DP or HDMI).
This is on condition that the display adapter supports this function.
Presence sensor
Activating/deactivating the presence sensor
This function shuts down the monitor gradually while you are absent.
After 10 seconds of absence, the brightness is reduced to a minimum.
After 30 seconds with no object present, the display lighting is switched off.
Proximity
Setting the distance to the monitor
With this function, you can indicate your actual distance to the monitor and
optimise detection by the presence sensor.
The vertical indicator dynamically displays the detected distance to the
monitor. This setting can be used to set the distance within which you want
the sensor to react. If the vertical line is outside the setting bar, this will be
judged as "absent" by the presence sensor.
This setting can only be applied if the
Presence Sensor
function is active.
Overdrive Activating/deactivating the overdrive function
This function can be used to improve the focus in fast moving images.
This setting can only be con fi gured in Video application mode.
DDC-CI Activating/deactivating the DDC-CI function
DDC-CI (Display Data Channel - Command Interface)
Data can be exchanged through the connection between the PC and the
display.
Factory recall Activate the factory settings
With this function all settings are reset to the factory settings on
recon
fi rmation.
The function is executed using . The Auto Processing message is displayed
via a VGA data cable. The language selection menu appears.
Displaying information
Call the Information setting window
This function displays details such as the model designation, serial number,
resolution, H/V frequency and ECO mode.
34 Fujitsu