Fujitsu P24W-7 LED, Operating Manual

Page: 35 / 48

Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness Set the brightness of the display
With this function you change the brightness of the background lighting.
You can see whether the ECO operating mode is active under the bar for
displaying the brightness setting.
Contrast Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Black level Set the brightness of the display
With this function you modify the contrast of dark colour tones.
ACR Enable/disable dynamic contrast
This function improves the contrast by automatically controlling the
background lighting in relation to the image being displayed.
This setting can only be con fi gured in Video application mode.
Auto Brightness Automatic brightness control
This function is used to automatically control the brightness of the
background lighting using the ambient light sensor.
This setting can only be con fi gured in devices with an ambient light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted manually by the user
Auto level Adjust the signal level
With this function you can automatically set the contrast.
The function is executed using .
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Selecting the application mode
Call up the Mode setting window
D mode
DICOM simulation settings (the settings for Color and ACR are locked:
Color = 7500K, ACR = off)
sRGB
Prede fi ned settings for sRGB (reduced brightness)
Of fi ce
Of fi ce settings (the settings for Color and sharpness can be adjusted)
Photo Prede fi ned settings for Photo (
Color
,
Sharpness
,
Saturation
)
Video Prede fi ned settings for Video ( Color , Sharpness , Saturation , ACR )
Fujitsu 31