Fujitsu Oracle M10-1, Service Manual

Page: 60 / 254

Table 5-1 Maintenance tools
Item Use
Phillips screwdriver (No.2) For removing or installing screws
Torx driver (T10) For removing or installing screws
Wrist strap For static grounding
ESD mat For static grounding
Note -
The mode switch on the operation panel does not need to be changed in active
maintenance.
5.2 Switching the Mode Switch to Service
Mode
1. Switch the mode switch on the operation panel to Service mode.
For details, see " 2.3.2 Control function of the operation panel ."
5.3 Checking the Operating Condition and
Resource Usage Status
This section describes the checking of the operating condition of the logical domain
and the resource usage status before maintenance is performed on each FRU.
5.3.1 Checking the operating condition of the physical
partition or logical domain
In the following execution example, the operating condition of the physical partition
and logical domain is checked from firmware.
1. Log in to the XSCF shell.
2. Execute the showpparstatus command to confirm the operating condition of
the physical partition.
In the following example, [PPAR Status] of PPAR-ID 00 displays "Running",
which indicates that the physical partition is operating.
Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021 46