4.18 Setting a Job Sequence
209
12. In the [Member Name] list of [Member Search], select the check box of a
user name, Active Directory group, or local account to be added to a job
group.
13. Press the [<<<] button.
The user, Active Directory group, or local account is added to the [Group
Membership List].
14. Press the [OK] button.
The number of members registered as job group members is shown in [Number
of Members] on the [Settings For Selected Group(s)] window.
15. Specify the members to be included in the job group in [Group Member
Settings].
16. Press the [Register] button.
A job group is added to the [Job Groups List] window.
HINT
To filter the LDAP List, refer to
"Filtering the LDAP List" (page 213)
HINT
Up to 1,000 members can be added as job group members.
To delete a member added to the [Group Membership List], select the check box in the
[Member Name] list, and then press the [>>>] button.
HINT
If the [Include all LDAP users as members] check box is selected, all LDAP users are
included regardless of the selection of LDAP users in [Group Membership List].