Security functions
Protecting BIOS Setup Utility (supervisor password
and user password)
If you have opened these operating instructions on the screen, we recommend
that you print them out. You cannot call up the instructions on the screen
while you are setting up the password.
BIOS SetupUtility
The supervisor password and the user password both prevent unauthorized use of the
BIOS
Setup Utility
. The supervisor password allows you to access all of the functions of the
BIOS Setup
Utility
, while the user password will only give you access to some of the functions. You can
only set up a user password if a supervisor password has already been assigned.
Calling and using the
BIOS Setup Utility
is described in the chapter
"Settings in BIOS Setup Utility", Page 64
.
Assigning the supervisor and user passwords
► Start the
BIOS Setup Utility
and go to the
Security
menu.
► Select the
Set Supervisor Password
field and press the Enter key.
With
Enter new Password
: you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password
requires you to confirm the password.
► Enter the password again and press the Enter key.
Changes have been saved
is displayed as a confirmation that the new password has been saved.
► To set the user password, select
Set User Password
and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit
BIOS Setup Utility
.
► In the
Exit
menu, select the option
Save Changes & Exit
.
► Select
Yes
and press the Enter key.
Password
Supervisorpassword
Userpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user password in order to open the
BIOS Setup Utility
. Please
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor password or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility
with the supervisor password.
Password
Supervisorpassword
Userpassword
► Start the
BIOS Setup Utility
and go to the
Security
menu.
► When changing the password, proceed exactly as when assigning a password.
56
Fujitsu
