Fujitsu MQ10A Operating Manual Download

Page: 25 / 106

Working with the Tablet PC

Status indicators

Statusindicators

Symbols

The status indicators (1, 2, 3, 4) provide information about the statuses of the power

supply and the rechargeable battery and the webcam.

No.

Status indicator

Description

Battery charging indicator

Please note: If the AC adapter is connected when the

state of charge of the battery is more than 95 %, charging

will not be started. When the state of charge of the battery

is less than 95 %, the battery will be charged to 100 % as

soon as the AC adapter is connected.
•

The indicator lights up orange: The rechargeable

battery is charging.

•

The indicator is not lit up: The battery is not charging

(the battery is already fully charged or the AC adapter

is not connected).

2, 3

Webcam status LED (for front and rear webcam)

•

The indicator lights up blue: The webcam is switched

on while the Tablet PC is switched on.

•

The indicator is not lit up: The webcam is switched off.

Power-on indicator

•

The indicator lights up white: The Tablet PC is

switched on or in sleep mode.

•

The indicator is not lit up: The Tablet PC is switched

off.

Fujitsu

Summary of Contents for MQ10A











































































































Search results

Summary of Contents for MQ10A

Reviews:

Related manuals for MQ10A

Brands by name

Popular brands

Fujitsu MQ10A, Operating Manual

Search results

Summary of Contents for MQ10A

Reviews:

Related manuals for MQ10A

Brands by name

Popular brands