Fujitsu MQ10A Operating Manual Download

Page: 10 / 106

Fujitsu Contact Information

Service and Support

You can contact Fujitsu Service and Support in the following ways:
•

Toll free phone: 1-800-8Fujitsu (1-800-838-5487)

•

Website:

"http://solutions.us.fujitsu.com/www/content/support/contact/index.php"

Before you place the call, have the following information ready so that the customer

support representative can provide you with the fastest possible solution:
•

Product name

•

Product configuration number

•

Product serial number

•

Purchase date

•

Conditions under which the problem occurred

•

Any error messages that have occurred

•

Type of device connected, if any

Fujitsu Shopping Online

Please go to

"http://www.shopfujitsu.com/store/ "

Maintaining Latest Conf guration

To ensure that you always have the most current driver updates related to your system,

occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is

available from the Fujitsu Support site. FSDM will allow you to view a list of the most current

drivers, utilities and applications to determine whether you have the latest versions. If you have

a Windows operating system, you will need to go to the Support Site to download the FSDM

Utility:

"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS"

Limited Warranty

Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the

Limited Warranty Terms and Conditions Booklet that came with your Tablet PC.

Fujitsu

Summary of Contents for MQ10A











































































































Search results

Summary of Contents for MQ10A

Reviews:

Related manuals for MQ10A

Brands by name

Popular brands

Fujitsu MQ10A, Operating Manual

Search results

Summary of Contents for MQ10A

Reviews:

Related manuals for MQ10A

Brands by name

Popular brands