Fujitsu MCJ3230SS, Product Manual

Page: 94 / 161

Host Interface
4-20 C156-E224-01EN
Any values specified for the Idle bit or Idle Condition Timer bits are ignored. The
ODD always uses the default timer values.
If the Standby bit is 1, Standby Condition Timer defines the time elapsed before
the ODD enters standby mode after it enters idle mode.
Specify the values for Idle Condition Timer and Standby Condition Timer in units
of 100 ms.
If the value specified for Standby Condition Timer is not a multiple of 600 (258h),
the ODD automatically rounds the value down to the next multiple of 60 s.
The values in the Power condition page can be saved.
Table 4.25 Variable values in the Power condition page
Bit
Byte
7 6 5 4 3 2 1 0
2 0
3 0 0 1
4-7 0
8-11 ffffffffh
Table 4.26 Default values in the Power condition page
Bit
Byte
7 6 5 4 3 2 1 0
2 0
3 0 1 1
4-7 00000708h
8-11 000043F8h
(5) Verify control page
Table 4.27 Verify control page
Bit
Byte
7 6 5 4 3 2 1 0
0 PS (1) 0 Page Code (3Eh)
1 Page Length (06h)
2 AV SM Reserved VM
3 Reserved DevType
4-7 Reserved
The Verify control page is unique to each vendor.
If the Audio Visual Mode (AV) bit is 0, normal cache mode is used. If the bit is 1,
AV data support mode is used.