AN706-00044-1v0-E
Table 5-2: setting window function
Name of area
Specification
1
Motor selection
Select which motor need to set, compressor / fan
2
Motor function set
Function set
3
Motor
parameter
set
Parameter
set
4
Parameter type selection
Selection motor parameter type
5
Config file save and load
Save and load config file
6
Set and default button
Set/default the parameter and function to hardware
- Notice:
- The hardware cannot be mounted Fan motor. So the function is ignored.
- Some parameters cannot change the value. (In that case, the parameter is exist as a
constant value in the firmware.)
14
Summary of Contents for MB9B100A Series
