AN706-00044-1v0-E
6
Constant observation
Observe system state, motor state, motor parameter, and so on.
If the button is pushed, the constant window opens.
(See Chapter 4.4.6)
7
Variable observation
Observe measure value with variable.
If the button is pushed, the variable window opens.
(See Chapter4.4.5)
8
Graphic
Observe measure value with wave.
If the button is pushed, Figure4-3 of the graphic window opens.
(See Chapter 4.4.4)
9
Language setting
Set system language Chinese or English
10
System current state
Show the current state: connect, PFC, compressor, Fan
- Notice:
- The hardware cannot be mounted Fan motor. So the function is ignored.
- The hardware is mounted PFC function. And the firmware control PFC function
automatically. So, GUI cannot control the PFC function.
(If you push green PFC function button in running compressor, the function is ignored.
After that, if you push red PFC function button again, the compressor stops.)
12
Summary of Contents for MB9B100A Series
