Fujitsu MB91F465XA Application Note Download | Manualshive

Page: 19 / 42

background image

MB91F465XA EMULATION

Chapter 4 Softune Workbench

© Fujitsu Microelectronics Europe GmbH

- 17 -

MCU-AN-300015-E-V11

4 Softune Workbench

The chapter describes the Softune Workbench Development environment for MB91F465XA.

4.1 Update of Softune Workbench

The Softune Workbench V6 for FR series on CD / DVD up to DVD version 5.1 does not fully
support MB91F465XA emulation. (Softune Workbench Version <= V06L06)

For this reason the 911.csv file needs to be updated. Extract the ZIP archive
(911_csv_01_26_02_465x.zip) into the folder

C:\Softune6\lib\911\

(Softune6 is the default

Softune Workbench installation folder).

Of course the Softune Workbench V6 for FR series must be installed before updating the csv
file!

4.2 Template Workspace for MB91F465XA series

In order to allow a quick and smooth project start-up Fujitsu Microelectronics Europe
supplies a template project as a reference. The easiest way to start a new project is to make
a copy of the template project and use this copy as a start-up. The template includes the
latest start91460.asm file, MCU header file (mb91465x.h and mb91465x_emulator.h), IRQ
table (vectors.c), basic linker and C-Compiler settings.

Note:

Due to the differences between the FlexRay communication controller in MB91F465XA and
emulation system, two configurations are available.

STANDALONE: for the MB91F465XA series

EMULATOR: for the emulation system

Depending on the selection of the

macro switch “EMULATOR”

(“menu Project -> Setup

Project -> C/C++ Compiler -> Category: Define Macro”)

,

the different interrupt vector table

and the different header files are included accordingly.

In any case the settings done in the template must be checked and have to be
adjusted to the specific needs and settings of the final application. The template is
providing an example for building up a new project.

THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU
MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS
OR/ELIGIBILITY FOR ANY PURPOSES.

(C) Fujitsu Microelectronics Europe GmbH

«
...
17
18
19
20
21
...
»

Summary of Contents for MB91F465XA











































Reviews:

No comments

Related manuals for MB91F465XA

Brand: C-TEC Pages: 2

Brand: Hach Pages: 128

Brand: Yamato Pages: 33

Brand: Lattice Semiconductor Pages: 26

Brand: Häfele Pages: 24

Brand: Centurion Pages: 16

Cutler-Hammer LMR

Brand: Eaton Pages: 38

Brand: FuzzDog Pages: 9

DMC-40x0 Series

Brand: Galil Motion Control Pages: 280

Z8 Encore! XP Dual F1680 Series

Brand: ZiLOG Pages: 18

Brand: Danfoss Pages: 10

Brand: TAC Pages: 76

Brand: DROPSA Pages: 29

Brand: Progres Pages: 2

Brand: W8ZR Pages: 77

Brand: YASKAWA Pages: 38

Brand: Matrix Pages: 10

Brand: HobbyKing Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands