Fujitsu MB90460 Series, Hardware Manual, Page: 24 / 739

5
CHAPTER 1 OVERVIEW
1.2 MB90460/465 Series Product line-up
The MB90460/465 series contains 6 different devices. Table 1.2-1 lists the product line-
up.
■
MB90460/465 Series Product Line-up
Table 1.2-1 MB90460/465 Series Product Line-up (1/2)
MB90V460 MB90F462 MB90F462A MB90F463A MB90462 MB90467
Classification — Flash type ROM with security Mask ROM
ROM size — 64K Bytes 128K Bytes 64K Bytes
RAM size 8K Bytes 2K Bytes
CPU function
Number of instruction: 351
Minimum execution time: 62.5 ns / 4 MHz (PLL x 4)
Addressing mode: 23
Data bit length: 1, 8, 16 bits
Maximum memory space: 16 MBytes
I/O port I/O port (CMOS): 51
PWC Pulse width counter timer: 2 channels 1 channel
UART
With full-duplex double buffer (8-bit length)
Clock asynchronized or clock synchronized transmission (with start and stop bits) can be
selectively used
16-bit reload
timer
Reload timer: 2 channels
Reload mode, single-shot mode or event count mode selectable
Can be worked with multi-pulse generator (MB90460 series only) or individually
16-bit PPG timer
PPG timer: 3 channels 2 channels
PWM mode or single-shot mode selectable
Can be worked with multi-functional timer / multi-pulse generator (MB90460 series only) or
individually
Multi-functional
timer
(for AC/DC
motor control)
16-bit free-run timer with up or up/down mode selection and buffer: 1 channel
16-bit output compare: 6 channels
16-bit input capture: 4 channels
16-bit PPG timer: 1 channel
Waveform generator (16-bit timer: 3 channels, 3-phase waveform or dead time)
Multi-pulse
generator
(for DC motor
control)
16-bit PPG timer: 1 channel
16-bit reload timer operation (toggle output, one shot output selectable)
Event counter function, 1 channel built-in
Waveform sequencer (includes 16-bit timer with buffer and compare clear
function)
Not present
8/10-bit A/D
converter 8/10-bit resolution:8 channels
Conversion time: Min. 6.13
µ
s (16 MHz internal clock)
External
interrupt 8 independent channels
Selectable causes: Rising edge, falling edge, “L” level or “H” level
Low-power
consumption
Stop mode / Sleep mode / CPU intermittent operation mode
Process CMOS
Part number
Parameter