Fujitsu M10 Series, Installation Manual

Page: 236 / 374

XSCF>
addcodactivation "Product: SPARC M10-x
SequenceNumber:xxxx
Cpu: noExpiration 2
Text-Signature-SHA256-RSA2048:
PSSrElBrse/r69AVSVFd38sT6AZm2bxeUDdPQHKbtxgvZPsrtYgumTDC
nC2ZwUq/JjogeMpmsgd8awSphnJkpbud/87PkP4cUvz/sCPv5xM5M/J+94a3vvEh
IhfmafmVhnvpLvS1Umm6iypOXMASHpPjkWqRt1qvSNwYAYwO0mGXLCUNggamQ4dm
3K3taCYr7WH9k84bRTKIlSkePdRuBTrtzUoDRJ2oY3IM6M1/9tRYOMGH
BSr0n0kS0Hfl5hspsbpwTZwozuSaysu04mri77VisyrfEGpnY053Ye3N
b1GCkFx1RH27FdVHiB2H0A=="
Above Key will be added, Continue?[y|n]:
y
XSCF>
showcodactivation
Index Description Count
------- ----------- ------
0 PROC 2
XSCF>
setcod -p
ppar_id
-s cpu
permits
XSCF>
setcod -p 0 -s cpu 4
3.
Open the relevant file (XXXX_XX_001.TXT), and copy the contents of the key.
4.
Execute the addcodactivation command to register the CPU Activation key.
Specify the CPU Activation key by enclosing it in double quotation marks. You
can enter the CPU Activation key by copying and pasting all of its contents.
Enter "y" for the confirmation message.
In the following example, a CPU Activation key for two CPU cores is registered.
5.
Execute the showcodactivation command, and confirm that the CPU
Activation key is registered with the XSCF.
7.12 Assigning CPU Core Resources
Assign the CPU core resources made available by a CPU Activation key to a physical
partition.
1.
Execute the setcod command to assign the CPU core resources to the
physical partition.
Specify a PPAR-ID for -p ppar_id . For permits , specify the number of CPU
Activations to assign to the PPAR.
The following example assigns four CPU cores to physical partition 0.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015 222