Fujitsu LIFEBOOK U7311 Operating Manual Download

Page: 45 / 86

Working with the notebook

►

Remove the SIM card from the SIM card holder (2).

►

Push the SIM card holder back into the slot (3).

►

Install the battery again, see

"Installing a battery", Page 34

Wireless components Wireless LAN / Bluetooth / LTE

The installation of radio components not approved by Fujitsu will invalidate
the certi

cations issued for this device.

Switching the wireless components on and off

►

Press the key with the radio symbol

to switch the wireless components on and off (

ight

mode).

WirelessLAN

Bluetooth

If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and LTE module will also be switched off.

Pay attention to the additional safety notes for devices with wireless components
provided in the "Safety/Regulations" manual.

You can obtain more information on LTE from your service provider.

Fujitsu

Summary of Contents for LIFEBOOK U7311























































































Search results

Summary of Contents for LIFEBOOK U7311

Reviews:

Related manuals for LIFEBOOK U7311

Brands by name

Popular brands

Fujitsu LIFEBOOK U7311, Operating Manual

Search results

Summary of Contents for LIFEBOOK U7311

Reviews:

Related manuals for LIFEBOOK U7311

Brands by name

Popular brands