Fujitsu LIFEBOOK T939 Page 56 Operating Manual Download

Page: 56 / 128

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Follow the manufacturer’s instructions when handling the memory cards.

Memory card

Supported formats

Your notebook supports the following formats:

•

Secure Digital (SD

Card)

•

SDHC

•

SDXC

Inserting the memory card

►

Gently push the memory card into the slot
until you feel it click into place. The label
area must be facing upward. Do not apply
excessive force, as otherwise the delicate
contact surfaces could be damaged.

Memory card

Depending on the particular type
used, the memory card may protrude
slightly from the slot.

Fujitsu

Summary of Contents for LIFEBOOK T939

































































































































Search results

Summary of Contents for LIFEBOOK T939

Reviews:

Related manuals for LIFEBOOK T939

Brands by name

Popular brands

Fujitsu LIFEBOOK T939, Operating Manual

Search results

Summary of Contents for LIFEBOOK T939

Reviews:

Related manuals for LIFEBOOK T939

Brands by name

Popular brands