Fujitsu LifeBook T732 Operating Manual Download

Page: 50 / 125

Working with the notebook

Removing and installing the battery

Only use rechargeable batteries approved by Fujitsu Technology
Solutions for your notebook.

Never use force when fitting or removing a battery.

Make sure that no foreign bodies get into the battery connections.

Never store a battery for longer periods in the discharged state. This
can make it impossible to recharge.

Removing the battery

►

Prepare for removal, see chapter

"Preparing to remove components", Page 83

►

Slide the release button (1) in direction of the arrow.

►

Slide the release button (2) in direction of the arrow.

►

Lift the battery out of the battery compartment (3).

Fujitsu

Summary of Contents for LifeBook T732






























































































































Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands

Fujitsu LifeBook T732, Operating Manual

Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands