Fujitsu LifeBook T732 Operating Manual Download

Page: 44 / 125

Working with the notebook

Key combinations

The key combinations described below apply when using Microsoft Windows
operating systems. Some of the following key combinations may not function in
other operating systems or with certain device drivers.

Key combinations are entered as follows:

►

Press the first key in the combination and keep it pressed.

►

While holding the first key down, press the other key or keys in the combination.

Combination

Description

Switching the loudspeakers on/off

This key combination switches the integrated loudspeakers on and
off.

Fn+F3

Loudspeaker

Enable/disable touchpad

This key combination enables and disables the touchpad.

Fn+F4

Touchpad

Touchpadbuttons

Touchpad

Decrease screen brightness

This key combination decreases the brightness of the screen.

Fn+F6

LCDscreen

Screenbrightness

Increase screen brightness

This key combination increases the brightness of the screen.

Fn+F7

Screenbrightness

Decrease volume

This key combination reduces the volume of the internal
loudspeakers.

Fn+F8

Volume

Increase volume

This key combination increases the volume of the internal
loudspeakers.

Fn+F9

Volume

Fujitsu

Summary of Contents for LifeBook T732






























































































































Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands

Fujitsu LifeBook T732, Operating Manual

Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands