Fujitsu lifebook e736 Operating Manual Download

Page: 75 / 110

Settings in BIOS Setup Utility

Discard Changes – Discard changes without exiting
the BIOS Setup Utility

►

To discard the changes you have made, select

Discard Changes

and

Yes

The settings in place when

BIOS Setup Utility

was called remain effective.

You can now make additional settings in the

BIOS Setup Utility

►

If you want to exit

BIOS Setup Utility

with these settings, select

Exit Saving Changes

and

Yes

Save Changes – save changes without exiting
the BIOS Setup Utility

►

To save the changes, select

Save Changes

and

Yes

The changes are saved. You can now make additional settings in the BIOS Setup Utility.

►

If you want to exit BIOS Setup Utility with these settings, choose

Exit Saving Changes

and

Yes

Save Changes and Power Off

►

To save the changes and switch off your device, select

Save Changes and Power Off

and

Yes

The changes are saved. Your device is shut down.

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands