Fujitsu lifebook e736 Operating Manual Download

Page: 51 / 110

Working with the notebook

Connecting the AC adapter to the Port Replicator

►

Connect the power cable to the
AC adapter (1).

►

Plug the power cable into the power
outlet (2).

►

Connect the AC adapter cable to the DC
jack (DC IN) of the Port Replicator (3).

Power Outlets will vary from country to country, see chapter

"When

travelling in other countries ", Page 19

When the notebook is connected to a Port Replicator, the operating system creates
a hardware pro

le for the "Docked" mode. In this pro

le, for example, the setting is

saved as to which monitor was last used for output. This pro

le will be loaded, as

soon as the notebook is connected to a Port Replicator of the same type.

Switching on the notebook via the port replicator

►

Press the Power ON/OFF button on the port
replicator to switch the notebook on.

The power-on indicator of the Port
Replicator lights up.

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands