Fujitsu lifebook e736 Operating Manual Download

Page: 45 / 110

Working with the notebook

SD cards

Slot

Your notebook is equipped with an integrated SD card reader.

Observe the manufacturer’s instructions when handling the memory cards.

Memory card

Supported formats

Your notebook supports the following format:

•

Secure Digital (SD

card)

Inserting the SD card

►

Carefully slide the memory card into the
slot. The label should be facing upward. Do
not apply excessive force, as otherwise the
delicate contact surfaces could be damaged.

Memory card

Depending on the particular type
used, the memory card may protrude
slightly from the slot.

Removing the SD card

Memorycard

In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for your operating system).

►

On devices with card locking: Press
on the storage card (1).

Memory card

The storage card is released and
can now be removed.

►

Pull the storage card out of the slot (2).

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands