Fujitsu lifebook e736 Operating Manual Download

Page: 42 / 110

Working with the notebook

Inserting or removing an optical disc

Inserting

Removing

The notebook must be switched on.

►

Push the insert/eject button (1).

The drive tray will open.

►

Gently pull the drive tray (2) completely out.

►

Place the optical disc in the drive tray with
the printed side facing upwards.

►

Remove an optical disc that has
been inserted.

►

Push in the drive tray until you
feel it lock into place.

Manual removal (emergency removal)

CD/DVD:

Manualremovalofopticaldisc

Emergencyremovalofopticaldisc

In the event of a power failure or damage to the drive, you can remove the optical disc manually.

►

Switch your notebook off.

►

Push a pen or a piece of wire (such as a
paperclip)

rmly into the opening (1).

The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands