Fujitsu LIFEBOOK E546 Page 99 Operating Manual Download | Manualshive

Page: 99 / 111

background image

Appendix

Creating a backup of the System-Speci

fi

c Software Drivers

We recommend you to create a backup of the content of the

C:\Drivers

on your system

to writable media or an external drive. System-speci

fi

c software drivers are also

available for download through the Fujitsu support site.

WINDOWS 7 RECOVER YOUR SYSTEM WHEN THE
HARD DRIVE IS STILL ACCESSIBLE

Using the Recovery and Utility Tools

The Recovery and Utility tools consist of a variety of tools that will help you recover your
recovery image and system images, and delete the data from your hard drive.

Methods for accessing the utilities

Recovery and Utility Tools are preinstalled in a hidden partition by the factory, or
they can be accessed by using the bootable disc.

Note:

The Recovery and Utility tools may be deleted from your hard disk drive if you modify the

partitions. If that occurs, you will not be able to use the hidden partition for booting to Recovery
and Utility Tools, but you will still be able to boot from the Bootable Disc.

Determining whether Recovery and Utility is pre-loaded

1. Turn on or reboot your system. When the Fujitsu logo appears, press the

F12

key.

2. Use the

Tab

key to get to the Application Menu.

3. Check whether the

Recovery and Utility

option is present. If it is not present, it means that

the utility must be used from the Bootable Disc. Proceed to the "“Running Recovery and
Utility from the Bootable Disc”"section if

Recovery and Utility

is unavailable.

Running Recovery and Utility from hard disk

1. Turn on or reboot your system. When the Fujitsu logo appears, press the

F12

key.

2. Use the

Tab

key to get to the Application Menu.

3. Move the cursor down to Recovery and Utility and press the

Enter

key.

4. Choose your language, if necessary. Select

Recovery and Utility

to proceed.

5. Three tool options appear:

Diagnostics

,

Recovery

, and

Utility

(refer to the" Recovery and

Utility tools "section below for instructions on how to use these tools).

6. If this was successful please skip the next step and go to the "Recovery and Utility tools" section.
7. If this was NOT successful, please go to the next step.

Running Recovery and Utility from the Bootable Disc

Note:

If your system does not have an internal writable DVD drive, connect

your system to an external drive.

To verify/change the boot-up priority (rather than booting-up from the hard drive or
an external media drive), perform the following steps:

1. Power on your system. When the Fujitsu logo appears on the screen, press the

F12

key.

2. Insert the bootable disc into the drive tray.
3. Highlight the CD/DVD option from the

Boot

menu, then press

Enter

.

Fujitsu

97

«
...
97
98
99
100
101
...
»

Summary of Contents for LIFEBOOK E546
















































































































Reviews:

No comments

Related manuals for LIFEBOOK E546

Brand: Asus Pages: 2

ViewBook VNB105

Brand: ViewSonic Pages: 2

Brand: ViewSonic Pages: 24

Brand: ViewSonic Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands