Fujitsu LIFEBOOK E4411 Operating Manual Download

Page: 74 / 93

Settings in BIOS Setup Utility

BIOS SetupUtility

Systemsettings,BIOSSetupUtility

Con

guration,BIOSSetupUtility

Setup

Systemcon

guration

Hardwarecon

guration

The

BIOS Setup Utility

allows you to set the system functions and the hardware

con

guration for the notebook.

When it is delivered, the notebook is set to factory default settings. You can
change these settings in

BIOS Setup Utility

. Any changes you make take effect as

soon as you save and exit the

BIOS Setup Utility

The

BIOS Setup Utility

program contains the following menus:

Info

Displays information relating to the BIOS, processor and notebook

System

Advanced system settings

Advanced

Con

guring various hardware parts such as USB ports, keyboards,

processors

Security

Password settings and security functions

Boot

Con

guration of the start-up sequence

Exit

Exits the

BIOS Setup Utility

Starting the BIOS Setup Utility

►

Start the device (switch off/on or reboot the Operating System).

BIOSSetupUtility

►

When switching on your device, press on function key

until the

BIOS-Setup-Utility

is displayed.

►

If a password has been assigned, enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator
or contact our customer service centre.

The

BIOS Setup Utility

starts.

Instead of pressing function key

, if you press function key

F12

when switching

on your device, a boot menu with options will appear. You can use this to start
the system, also via other data sources, e.g. via a network.

You can also access the

BIOS-Setup-Utility

from the boot menu with the tab key.

Fujitsu

Summary of Contents for LIFEBOOK E4411






























































































Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands

Fujitsu LIFEBOOK E4411, Operating Manual

Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands