Fujitsu LIFEBOOK E4411 Operating Manual Download

Page: 59 / 93

Security functions

Removing passwords

To remove a password (without setting a new password) perform the following steps:

Password

Supervisorpassword

Userpassword

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

►

Highlight the

Set Supervisor Password

Set User Password

eld and press the Enter key.

You will be requested to enter the current password by the

Enter Current Password

prompt.

You will be requested to enter a new password by the

Enter New Password

prompt.

►

Press the Enter key twice.

►

In the

Exit

menu, select the option

Save Changes & Exit

►

Select

Yes

and press the Enter key.

The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.

Fujitsu

Summary of Contents for LIFEBOOK E4411






























































































Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands

Fujitsu LIFEBOOK E4411, Operating Manual

Search results

Summary of Contents for LIFEBOOK E4411

Reviews:

Related manuals for LIFEBOOK E4411

Brands by name

Popular brands