Fujitsu Libra S6 Operator'S Manual Download Page 61

Page: 61 / 125

Chapter 6 Replacing the Consumables

How to Load
Documents

How to Use the
Operator Panel

Replacing the
Consumables

Replace the pad unit in the following procedure.

Turn off the scanner and wait for at least 15 minutes.

For details, refer to

"1.3 Turning the Power ON/OFF" (page 19)

Unplug the power cable.

Remove all documents from the ADF paper chute
(feeder).

Open the ADF cover.

For details, refer to

"1.4 Opening/Closing the ADF" (page 20)

Remove the pad unit.

Squeeze both ends of the pad unit and pull it out in the direction of the
arrow.

6.2 Replacing the Pad Unit

When the ADF cover is open, it might close
accidentally. Be careful not to get your
fingers caught.

Pad Unit

To avoid injuries, be careful not to get your
fingers caught on the metal part that has
been exposed after the pad unit was
removed or the pick spring (metal part).

Pick Springs
(Metal Part)

Metal Part

Summary of Contents for Libra S6






























































































































Search results

Summary of Contents for Libra S6

Reviews:

Related manuals for Libra S6

Brands by name

Popular brands

Fujitsu Libra S6, Operator'S Manual

Search results

Summary of Contents for Libra S6

Reviews:

Related manuals for Libra S6

Brands by name

Popular brands