Fujitsu LAN Console, Installation, Configuration And Operation

Page: 81 / 139

U41224-J-Z916-1-76
75
Configuration Remote boot und installation
6.5.2 bootpconf
Syntax:
bootpconf [-u]
The bootpconf tool is used to start or stop the DHCP service in BOOTP mode on
the LAN Console. If you input the command without parameters the
DHCP
ser-
vice is started in
BOOTP
mode.
-u :
(unconfigure). If the DHCP service has been started with bootpconf , it is
now stopped.
V
Configuration files being deleted
In addition, all configuration files under /var/dhcp are deleted, the links to
/etc/rc[0-3,S]/[KS]34dhcp are deleted, the dhcpd options in /etc/init.d/dhcp
are reset and the
/etc/default/dhcp
configuration file is deleted.
Procedure in the system
1. Stop the DHCP service if it is running.
2. Create the /etc/default/dhcp file.
3. Enter the
dhcpd
options in
/etc/init.d/dhcp
( -o 10 -b manual).
4. Create the
DHCP
service configuration table
/var/dhcp/dhcptab
with
dhtadm -C
.
5. Create the local DHCP network table /var/dhcp/xxx_xxx_xxx_xxx with
pntadm -C
, empty at present.
6. Create or update the local LAN macro in
/var/dhcp/dhcptab
with
dhtadm -A -m xxx.xxx.xxx.xxx -d ":Subnet=${SUBNET_IP}:Router=
${ROUTER_IP}:"
7. Define links from
/etc/init.d/dhcp
to
/etc/rc[0-3,S]/[KS]34dhcp
.
8. Start the DHCP service in BOOTP mode.