Wireless laser mouse
User’s Manual
1.
Contents
z
2.4GHz Laser Mouse
z
Micro Dongle
z
Two AAA Batteries
z
Mouse Driver CD
z
User’s Manual
2.
The RF mouse overview
(1)
Micro Dongle (7) Connect button
(2)
Left Key (8) Power ON/OFF
(3)
Right Key (9) Laser LED
(4)
Roller Key
(5)
Backward (B4)
(6)
Forward (B5)
3.
Hardware Installation
z
Installing Batteries:
Remove the battery cover from the bottom case and put 2 AAA batteries into battery compartment.
z
Pairing the Micro Dongle (Receiver) to the Computer
Plug the Micro dongle into any available USB port on your computer and an indication of identifying new
USB device will appear on the Screen
●
Pairing the receiver and mouse
Turn on the mouse power, keep the mouse close to the receiver and
wait for at least 5 seconds. For the 1
st
pairing, the Green LED of
mouse turns on when pairing begins. After pairing successful, the
Green Led turns off automatically and an indication of new input
device will appear. The user can now start to enjoy the RF mouse. Note: If the Mouse is not first time use and had
been “Turn Off” the power under different Resolution, when you “Turn ON” the power again, then it will appear
the last memory resolution LED light.
5 seconds Bottom Green LED “On” “Off”
4.
Driver Installation (Notice: The driver supports Windows 2000 XP and Vista)
Installation of driver CD will be done automatically once the CD is plugged in and recognized. In case it doesn’t
work, please try steps below:
z
Insert the driver CD
