Fujitsu GPS User Manual Download

Page: 86 / 206

Basic operation

4. Map retrieval methods

Retrieving a map using a memory point

If memory points have been registered in advance (see

"Registering memory points"

page 146), a map can be retrieved using one of these points.

Touch the memory point you want
to display from the list.

●

A map of the area around the memory
point will appear.

●

See

"Performing operations on a

retrieved map"

on page 94 for

information regarding the displayed
map.

Retrieving a map using the destination archive

The most recently set destinations (a maximum of 99 points) are automatically registered. A
map for each of these points can easily be retrieved.

Touch the destination you want to
display from the list.

●

The map for that destination is
displayed.

●

Touch

display the start point map from the
previous route guidance session.

●

See

"Performing operations on a

retrieved map"

on page 94 for

information regarding the displayed
map.

Previous Start Point

●

Your home and quick access points are not registered in the destination archive.

●

Refer to the section

"Deleting destination archives"

on page 170 for deleting

destination archives.

Summary of Contents for GPS















































































































































































































Search results

Summary of Contents for GPS

Reviews:

Related manuals for GPS

Brands by name

Popular brands

Fujitsu GPS, User Manual

Search results

Summary of Contents for GPS

Reviews:

Related manuals for GPS

Brands by name

Popular brands