Operation
Switching off the device
►
Shut down the operating system in the proper way. In Windows: from the
Start
menu select the
Shut Down
option.
Device,
Monitor,
►
If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
►
If necessary, switch the monitor off (see the operating manual for the monitor).
Activating power-saving mode
Due to customer requirements and requirements of the operating system, the
"Wake-on-LAN" (WoL) function is switched on by default. With the WoL function,
the power draw in OFF mode increases slightly.
To meet the requirements of EC regulation 1275/2008 regarding the implementation of the
Ecodesign directive (2009/125/EC), the default WoL setting must be changed as follows:
►
To start the
BIOS Setup utility
after the system start, press the ON/OFF
switch for two to three seconds.
or
►
Press the
F2
function key.
►
In the
Power
sub-menu, change the
External Power Button Control
,
LAN
and
Keyboard
to
disabled
.
►
To save the setting and exit the
BIOS Setup Utility
, press function key
F4
.
After making this change, the system will achieve the lowest energy
saving mode during shut-down.
In this status, the “Wake-on-LAN” function can no longer be used.
Open BIOS Setup
BIOS-Setup
►
When the system starts, press the ON/OFF switch for two to three seconds.
or
►
Press (possibly several times) the
F2
key.
BIOS Setup
will be started. Select one of the tabs to access other setting options in
BIOS Setup
.
PXE system boot
PXEsystemboot
►
Switch the device on with the ON/OFF switch.
►
When starting the system, press the
F12
key several times.
The boot menu is displayed.
►
Select the desired boot option.
26
Fujitsu
