manualshive.com logo in svg

Fujitsu fi-8150, Operator'S Manual

Share
Download
Fujitsu fi-8150 Operator'S Manual Download Page 91

Documents with Different Sizes

1

Adjust the stacker to fit the longest document.
For details, refer to 

Document Length Is A5 (Portrait) or Longer (page 87)

.

2

Pinch the stack supporter and pull it out.

ATTENTION

●

Do not apply too much force to the stack supporter after pulling it out, because it may break.

●

Documents that are damaged easily, such as thin paper documents, may not stack neatly when they are
ejected because the stack supporter may prevent documents from ejecting fully or may cause documents
to curl.

 

HINT

●

When scanning documents including documents smaller than A6 size, using the stack supporter
prevents documents from scattering.

Basic Operations

91

Summary of Contents for fi-8150



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands