Fujitsu fi-8150, Operator'S Manual

Page: 296 / 434

●
Are the scanner and server connected to the network?
Solution
Refer to Cannot Connect the Scanner and a Computer with the Network [fi-8190/fi-8290/fi-8170/fi-8270/
fi-8150/fi-8250] (page 288) and take measures accordingly.
●
Is the IP address of the scanner correct?
Solution
Check the IP address of the scanner.
You can check the IP address of the scanner as follows.
●
For fi-8190/fi-8290/fi-8170/fi-8270
The IP address of the scanner can be checked using one of the following methods.
- The IP address of the scanner can be checked in [1:Scanner Information] on the [Settings Menu]
screen of the operator panel.
For details, refer to
How to Use Settings Menu (page 146) .
- The IP address of the scanner can be checked by using IP Address Setting Tool.
For details, refer to the Network Setup Tool for fi Series Help.
For details about how to start up IP Address Setting Tool, refer to
Starting Up IP Address Setting Tool
[fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 71) .
-
The IP address of the scanner can be checked in fi Series Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) [fi-8190/fi-8290/fi-8170/fi-8270/
fi-8150/fi-8250] (page 399) .
●
For fi-8150/fi-8250
The IP address of the scanner can be checked using one of the following methods.
- The IP address of the scanner can be checked by using IP Address Setting Tool.
For details, refer to the Network Setup Tool for fi Series Help.
For details about how to start up IP Address Setting Tool, refer to
Starting Up IP Address Setting Tool
[fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 71) .
-
The IP address of the scanner can be checked in fi Series Network Settings.
For details, refer to
Network Settings (fi Series Network Settings) [fi-8190/fi-8290/fi-8170/fi-8270/
fi-8150/fi-8250] (page 399) .
When specifying an IP address manually, specify the correct IP address.
When setting the IP address automatically, check whether the DHCP server functions normally.
Even when the DHCP server functions normally, an IP address may not be assigned correctly depending on
the settings for the DHCP server. Check the operation status and the settings for the DHCP server.
●
Is the IP address of the scanner used for other communication devices?
Solution
If there are multiple communication devices using the same IP address on the same network,
communication may fail. Avoid duplicates in IP addresses.
Troubleshooting
296