Chapter 8 Operational Settings
158
By setting a password, the Software Operation Panel can run
in [View Only mode] which allows users to only view the
scanner settings.
The scanner settings can be configured if no password is set.
In order to prevent unnecessary changes to the settings, a
password can be used to restrict user operations.
Setting a Password
Set a password in the following procedure:
1
Right-click the Software Operation Panel icon in the
notification area, and select [Password Setting] from the
menu.
The [Password setting] window appears.
2
Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
A confirmation message appears.
3
Click the [OK] button.
The password is set.
8.2 Password Setting for the Software Operation Panel
