Fujitsu fi-7300NX Operator'S Manual Download

Page: 56 / 321

Basic Operations

This section explains how to operate the scanner.

Turning the Power ON/OFF

This section explains how to power on/off the scanner.

HINT

The method by which the scanner is powered on/off can be specified from one of the following:

●

Pressing the [Power] button on the scanner.

●

Using an AC power strip to control power supply for peripherals such as a scanner in accordance with the
computer's power.

●

Turning on/off the scanner in accordance with the computer's power.

For details, refer to

Method of Turning the Scanner ON/OFF [Power SW Control] (page 304)

How to Turn the Power ON

Press the [Power] button on the scanner.

The scanner is turned on, and the [Power] button lights in green.

Summary of Contents for fi-7300NX


































































































































































































































































































































Search results

Summary of Contents for fi-7300NX

Reviews:

Related manuals for fi-7300NX

Brands by name

Popular brands

Fujitsu fi-7300NX, Operator'S Manual

Search results

Summary of Contents for fi-7300NX

Reviews:

Related manuals for fi-7300NX

Brands by name

Popular brands